Every year, we conduct a building walk-through for all buildings on all campuses. Though we don’t use an official checklist on our walk through, here is a list you could use to get your workspace in compliance with university, state and federal regulations.
FIRE SAFETY AND PREVENTION |
- Exit lights – present and clearly illuminated
|
- Exit doors, fire doors – not wedged open, close tightly, not blocked
|
- Emergency lighting – adequate, in working condition
|
- Fire extinguishers- should have a clear and open space around them and easily accessible
|
- Sprinkler clearance – no storage is allowed within 18 inches of sprinkler heads (24 inches of ceiling where no sprinkler system exists)
|
|
- Storage – none in the staircases including underneath the stairs
|
- Floors, Walls, Ceilings – Check for holes in the wall and ceiling, missing floor tiles and ceiling tiles. Put in a work order to facilities if you see any of these violations
|
ELECTRICAL HAZARDS |
- Extension cords and power strips – not plugged in to other extension cords or power strips. No large appliances should be plugged into an extension cord
|
- Power strips – UL listed and have circuit breakers.
|
- Plugs are in good condition – there are no exposed wires or holes near the outlet
|
- Wall outlet plate and junction box covers – in place
|
- Electric circuit panels – kept clear (at least 36 inches open area) and closed
|
- Wires or extension cords – do not run under carpets or rugs, through doorways, or placed in other traffic areas
|
WALKING SURFACES |
- Aisles – kept clear (minimum 36″) and free from trip hazards like cords,
|
- Tripping hazard – carpets, rugs, and mats do not present trip hazard
|